https://www.omaniaa.co/blog.php?u=123470746 ÓÈáÉ ÚãÇä,ÓÈáÉ,ÇáÓÈáÉ,ÇáÓÈáÉ ÇáÚãÇäíÉ,ÓÈáÉ ÇáÚÑÈ,ÚãÇä,ÓáØäÉ ÚãÇä,ÓæÞ,ÓæÞ ÚãÇä,ÓíÇÓÉ ÚãÇä ar Wed, 29 Apr 2026 19:58:33 GMT vBulletin 60 https://www.omaniaa.co/newimg/misc/rss.jpg https://www.omaniaa.co/blog.php?u=123470746 https://www.omaniaa.co/entry.php?b=98820 Sun, 18 Aug 2019 13:02:25 GMT Vehicle model: Nissan Murano Z51 3.5L CVT 2012Y Purpose: reset CVT fluid “life” monitor Device used: You need a professional scan tool... Vehicle model: Nissan Murano Z51 3.5L CVT 2012Y

Purpose: reset CVT fluid “life” monitor



Device used:

You need a professional scan tool to reset the CVT transmission fluid count. The normal code readers will not work.

Nissan Consult III, Nissan Consult III Plus, Launch x431 V and an Autel ms908p scanner, all of these will do the reset.



Procedure for using Nissan Consult III diagnostic tool:

If you are using a clone, Consult 3 plus is better choice.

This procedure is preferably carried out after changing the oil in the CVT .



Launch Starter in which we select Consult-III :

图片1

Press the Connect button :

图片2

Choose vehicle model Murano Z51 after 2010.v. and press the Select button :

图片3

Confirm the selection with the Confirm button :

图片4

Choose Diagnosis :

图片5

Select the type of Can- bus according to the configuration, in this case, the very first, and click the Next button :

图片6

Click on the tablet (top left):

图片7

Choose System Diagnosis :

图片8

Click on Transmission and OK :

图片9

Moving towards Work Support :

图片10

Click on Conform CVTF Deteriortn and Next :

图片11

At the moment, the fluid counter shows 7897

图片12

Click the Clear button and once again agree:

图片13

Counter reset:

图片14

Reset fluid count success with Nissan Consult 3 scanner.

图片15

Done. ]]> obd2lily https://www.omaniaa.co/entry.php?b=98820 https://www.omaniaa.co/entry.php?b=98604 Sat, 29 Jun 2019 09:44:07 GMT I have the problem with WIS standalone installation Version: DAS 012012, MB Star C4 LanID: 080002AF5490 1) Keys; checked and used 2 different... I have the problem with WIS standalone installation
Version: DAS 012012, MB Star C4

LanID: 080002AF5490
1) Keys; checked and used 2 different keys, they are all – saved successfully
2) WIS is 012012
3) Modifyed d2ksetup.ini
4) Running sdswitch.exe
trying to install on “clean” system, Xentry DAS is working, but WIS (surprisingly) I cannot install.

Solution found!
Problem only in permission on folder e:\wis
You need to do:
1) Right click on folder WIS disc E:
2) Select “Sharing and Security” menu
3) Click on Security tab
4) Select “Users” in “Group or user names:” list
5) in list “Permission for Users” check “Full control”
6) Press OK
and you done！ ]]> obd2lily https://www.omaniaa.co/entry.php?b=98604 https://www.omaniaa.co/entry.php?b=98574 Sun, 23 Jun 2019 08:36:01 GMT [B][URL="https://www.obd2tool.com/goods-1610-Nissan+Consult-3+Plus+V3411+Nissan+Diagnostic+Tool.html"]Nissan Consult 3 Plus[/URL] programming reviews:[/B]
I looks like it’s a remote system using a bluetooth and is good up to 5 meters away. It also looks like it only works for OBD2…1996 and newer.
The Nissan Consult three Plus does not support the Q45’s made from 1990-1996 YET. I hope that changes soon.
I have an Infiniti G37 (2011). I used Nissan Consult III Plus to enter the pin and start programming new Key Fobs.
I was able to clear the existing keys , but am not able to program the new Fob(s).
The cheapest way to program Nissan:
No need a smart card!
I managed to do Immo and programming without spending out on the smart card.
find the consult diagnostictool.ini file
open with notepad
copy and paste this at the bottom
——————————————————–
[mode]
debug_mode=TRUE
debug_mode_vehicle-battery=TRUE
[vehicles]
tab_index=0
———————————————————
ALSO, MAKE SURE ACCESS_MODE IS SET TO 1 IN THIS FILE
NOW SAVE AND REOPEN CONSULT…VOILA!!!!!
Here is the location of fille DIAGNOSTICTOOL.INI:
C:\CONSULT-III_plus\System\Application\ApplicationData\CommonSetting\DiagnosticTool.ini
Please just try this at your own risk, I am not responsible the result if you have any question.
I share this because you can do this without spending money to buy the security card.
The best way to program Nissan:
If you can’t solve this problem, better buy a smart card for IMMO and PROGRAMMING.
[URL="http://forobd2tool.com/wp-content/uploads/2019/06/nissan-immo-programming-smart-card.jpg"][IMG]http://forobd2tool.com/wp-content/uploads/2019/06/nissan-immo-programming-smart-card.jpg[/IMG][/URL]

Connect Consult 3 plus to the computer and the vehicle: Nissan Altima year 2006
Connection method: via the USB cable or Bluetooth
Insert key into the key hole, turn ignition ON with engine OFF
Start Consult-III plus software
Click on “Connect” button on VIMI selection screen to connect with VI
[URL="http://forobd2tool.com/wp-content/uploads/2019/06/nissan-consult-3-plus-add-new-keys-1.jpg"][IMG]http://forobd2tool.com/wp-content/uploads/2019/06/nissan-consult-3-plus-add-new-keys-1.jpg[/IMG][/URL]

the computer and vehicle establish good communication
then Consult3 plus software will display VIN info
Choose Nissan model and year, and confirm vehicle information
[URL="http://forobd2tool.com/wp-content/uploads/2019/06/nissan-consult-3-plus-add-new-keys-3.jpg"][IMG]http://forobd2tool.com/wp-content/uploads/2019/06/nissan-consult-3-plus-add-new-keys-3.jpg[/IMG][/URL]

Wait until the Nissan Consult module to access all control modules, Engine, BCM, Transmission, Airbag etc.
The car dashboard will illuminate and the indicator lights on Consult 3 will flash
[URL="http://forobd2tool.com/wp-content/uploads/2019/06/nissan-consult-3-plus-add-new-keys-2.jpg"][IMG]http://forobd2tool.com/wp-content/uploads/2019/06/nissan-consult-3-plus-add-new-keys-2.jpg[/IMG][/URL]

Diagnostic: Direct Diagnostic Mode program
Tick Key programming icon (NATS SELECT DIAG MODE) on the left menu, plug the security card and press START
(There are two options under NATS SELECT DIAG MODE. Select C/U INITIALIZATION.
[URL="http://forobd2tool.com/wp-content/uploads/2019/06/nissan-consult-3-plus-add-new-keys-4.jpg"][IMG]http://forobd2tool.com/wp-content/uploads/2019/06/nissan-consult-3-plus-add-new-keys-4.jpg[/IMG][/URL]

Push START BUTTON after enter password
Manually enter the pin code
Initialization completed
Follow the guide in the sw to finish [URL="https://www.obd2tool.com/category-8-b0-Auto+key+Programmer.html"]key programming[/URL] ]]> obd2lily https://www.omaniaa.co/entry.php?b=98574 https://www.omaniaa.co/entry.php?b=98552 Sun, 16 Jun 2019 07:39:53 GMT [URL="https://www.obd2tool.com"]OBD2TOOL[/URL] will offer you some questions and answers about [URL="https://www.obd2tool.com/goods-10148-XTOOL-A80-With-Bluetooth-WiFi-Full-System.html"]XTOOL A80 H6[/URL] to help you know more about this device.
[B]What’s the main features of A80?[/B]
* Key programming
* All System Diagnostic
* EEPROM Adapter
* Odometer Adjustment
* Electric Parking Brake
* Steering angle sensor adjustment
* DPF
* Service/Maintenance Light
* Cylinder
* Air Suspension
* PIN Code Reading
* Headlight
* Tyre Pressure Reset
* Throttle Relearn
* CAN BUS and UDS: Available! It supports the latest vehicles with CAN BUS and UDS protocols
[B]How to activate and update Xtool A80?[/B]
First turn on the A80, enter the tablet setting function to enable the WLAN function, and connect to the wireless network. Click on the A80 diagnostic icon to activate the page:
Step1. Click the Settings icon on H6 Elite.
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-1.png"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-1.png[/IMG][/URL]
Step2. Turn on Wi-Fi and connect to available internet.
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-2.jpg"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-2.jpg[/IMG][/URL]
Step3. H6 will automatically prompt that you need to activate, please click NEXT.
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-3.jpg"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-3.jpg[/IMG][/URL]
Step4. Please fill in the company name and mailbox, (no need to fill in Phone number cause overseas phone number cannot receive the auth code.),
then click OK to complete the activation.
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-4.jpg"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-4.jpg[/IMG][/URL]
Software Upgrading
Step1. Please open H6 APP and click update.
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-5.jpg"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-5.jpg[/IMG][/URL]
Step2. You can choose Update all or any single software to upgrade.
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-6.jpg"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-activate-Xtool-A80-6.jpg[/IMG][/URL]
[B]How to connect the A80 with the vehicle?[/B]
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-connect-the-A80-with-the-vehicle.png"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-connect-the-A80-with-the-vehicle.png[/IMG][/URL]
See the picture below:
â‘ A80 Device
â‘¡VCI box
â‘¢Adapter cable (optional for non-standard OBD II 16pin connectors)
â‘£Car model
⑤Adapter (optional for non-standard OBD II 16pin connectors)
The A80 Device is connected to the vehicle through the VCI diagnostic box with the main test line.
[B]What special diagnostic functions does the A80 contain?[/B]
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/What-special-diagnostic-functions-does-the-A80-contain.jpg"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/What-special-diagnostic-functions-does-the-A80-contain.jpg[/IMG][/URL]
[B]How to change language?[/B]
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-change-language-of-the-A80.jpg"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-change-language-of-the-A80.jpg[/IMG][/URL]
Go to settings, click on language, then change it in the language options on the right.
How to set Bluetooth?
[URL="http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-set-Bluetooth-of-the-A80.jpg"][IMG]http://avdicommander.com/wp-content/uploads/sites/7/2019/06/How-to-set-Bluetooth-of-the-A80.jpg[/IMG][/URL]
Click on the gear icon to enter settings, tap Bluetooth, and then click on search Bluetooth, Bluetooth name for the corresponding serial number or
Go to A80 app,click on Settings, turn on Bluetooth, tick, as shown in the following image:
[B]What can you do with Xtool Cloud System?[/B]
You can easily inquire about the maintenance information on the cloud service platform, combine with the results of the car diagnosis to query and use, and use the forum to communicate with other Xtool users. Also, you can access to an online database that provides extensive repair and diagnostic technology information.
[B]How to get a quick support?[/B]
If you encountered problems, do not know how to solve, you can open the application to seek remote assistance.
1.Turn on A80 deviceand go to the A80 App
2.Click on the “remote Control” application, then open the TeamViewer interface. It will show the device ID
3.Provide your ID to Chinacardiags customer service. Then he/she will send it to the after-sales tec
4.System will pop-up window, allow the other people to do the remote control. After-sales technician willcontrol your A80, please do not operate the equipment, and if possible, cooperate with the staff to complete the operation. ]]> obd2lily https://www.omaniaa.co/entry.php?b=98552 https://www.omaniaa.co/entry.php?b=98525 Wed, 29 May 2019 09:07:22 GMT [B]Problem:[/B]
Hello MB star
I just recieved My tablet and it looks and work Very good .
But The sd connect interface is Saying “please put in batteries”
What type of batteries is it ?
[B]Solution:[/B]
This problem same to :
[URL="https://www.obd2tool.com/goods-6841-MB+SD+Connect+C4C5+Star+Diagnosis+Plus+Panasonic+CF19+Laptop++With+Vediamo+and+DTS.html"]SD Connect C4[/URL] mux display: Favor inserir baterias(Please insert batteries)

Here you go :
Please prepare the following tools:
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture1.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture1.jpg[/IMG][/URL]
â‘ — SDconnect multiplexer which need to input the batteries。
â‘¡— 6 units Ni-MH Rechargeable batteries，Size：AA， Voltage：1.2V， Capacity：above 1700mA。
â‘¢— 1 unit 108M WIFI Card。
â‘£— Plum screwdriver，Specification：T-20
[B] Take out the rubber:[/B]
2.1 Use the T20 Plum screwdriver to take out the screws as below.

2.2 Take out the rubber as below.

â‘ — Batteries Space.
â‘¡— WIFI Card Space.
â‘¢— SD Card Space.
[B] Insert the Rechargeable batteries.[/B]
3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.

3.3 Insert the batteries. Note the Battery polarity.
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture6.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture6.jpg[/IMG][/URL]
3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

Installing WIFI Card.
4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture9.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture9.jpg[/IMG][/URL]
4.2 Push it to make it totally connected.
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture10.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture10.jpg[/IMG][/URL]
4.3 Cover the rubber and fix the screws to finish all the work.
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture11.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture11.jpg[/IMG][/URL]
Note 1:
Go to the info section within DAS Xentry— search SDconnect and you will find what all the SDconnect symbols defined!!
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture12.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture12.jpg[/IMG][/URL]
Note 2:
pls check these picture, you can choose self-diagnosis your SD connect c4
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture13.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture13.jpg[/IMG][/URL]
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture14.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/05/how-to-install-sdconnect-c4-battery-Picture14.jpg[/IMG][/URL] ]]> obd2lily https://www.omaniaa.co/entry.php?b=98525 https://www.omaniaa.co/entry.php?b=98506 Sun, 19 May 2019 08:01:19 GMT Here is the [URL="https://www.obd2tool.com/goods-5219-JOHN-DEERE-DIAGNOSTIC-KIT-software-in-hard-disk.html"]John Deere Service Advisor[/URL] Installation guide on Win7/Win10.The steps of installation on win7 is same as win7.I will show the John Deere Service Advisor installation on win7,you just need to check the method.And at end of article you would better watch the video guide.
John Deere Service Advisor Freed Download:
John Deere Service Advisor Software Free Download
Note:Try on WIN7 32bit successfully, try Win10 64bit at your own luck.
[B]Procedures of [URL="https://www.obd2tool.com/category-39-b0-Heavy+Duty+Diagnostic+Tools.html"]Heavy Duty Truck Scanner [/URL]John Deere Service Advisor Installation:[/B]
Installation Method 1:
1.you must have enough disk space to download the full set of February 2016 data base (52Gb); it comes with seven iso images and the SA4.0 image and a February 2015 update which you don’t need and of course the activator.
2.use an iso mounter software to mount the SA4.0 image to a virtual drive.
3.browse to the setup file in your virtual drive and run it as administrator
follow the steps (it will prompt for a username and password use those of your windows user account if you’re under 7-8 or 10 windows version)
it will take a while! don’t turn off the computer and don’t worry about the incompatibility messages that windows will show you during the installation process specially for the SQL 2005 server installation.
4.after completing the installation of the SA4.0 reboot the computer and set back the system time to mars 2016.
5.mount the first iso image of the data discs to a virtual drive, browse the sauce folder and run setup file as administrator; wait for it to complete the installation it will launch the SA 4.2.005 at this step you may have a message that the SA 4.2.005 is not capable of launching the search engine don’t worry close it and go to task manager (ctr+alt+sup)
click on services and look for the LightweightIDOL service if it’s stopped than run it.
6.run the activator as administrator and activate the service advisor; don’t use the prolongation tool at this step!.
7.now go to the task manager again and look for the SAupdater service and disable it.
8.re-open the service advisor, click the accept button for the license agreement, and configure the path for the data access you can use the mapping for a virtual drive choice to map each data disc image to a virtual drive it will take more than an hour to load all the data disk.
it will ask you for scheduling the update choose the end of the week and create the task.
9.Now close the SA, use the activator again but this time just use the prolongation tool choose 9000 days or whatever you want.
10.Look for the task scheduler and run it, choose the SAupdate task and modify the time for the task to begin to 2030 or whatever you want.
11.reboot the computer and set back the time machine to the actual time, launch SA and everything must work ok.
if you have any trouble than you messed something just clean up and reinstall.
Installation Method 1:
Firstly,you need to download the files as below:
[URL]https://mega.nz/#!OocRBC5B!Mg6k1UzCVc168wr–BJ5xTsgGt7TOTsI-AhBNPjVNpk[/URL]
John-Deere-Service-Advisor-Installation
– Be sure that you have JAVA and Acrobat reader installed on your PC (wich if you have a internet connection it will automaticly ask and find and load its self)
– Mount the CD JDSA4.0 and start the installation ..
– a user name and password will be reqired .. so better to use
User: Admin
Password: 123456
– after the Installation, dont run the program !
– restart your PC ,
– after the installation, use the keygen
– how to use the keygen
– you need to find the Host ID for the installation ..
– Run c:Program FilesECULPECULPINIConfig.exe
– Get HostID from Security tab
– open the keygen and put the Host ID , choose the expire date, select all in both fields and generate.
– you will get 3 files
– run dl.xml.reg file and confirm registry changes
– copy license file jdlm.lic into C:JDLM folder
– PS. DO NOT USE dl.xml.reg file or dl.xml files generated by keygen,( delete the two file made by kg)
– USE the files in the lic folder.
WIN XP:
C:Documents and SettingsAll Users.WINDOWSApplication DataService ADVISOR
WIN 7:
C:ProgramDataService ADVISOR
– Go to patch1 folder and
– run Patch.bat
– Replace the Original ServiceADVISOR.exe with the Patched one from _patch floder !! in the Installation folder
C:Program FilesService ADVISOR .
– Mount the DVD1 (AG_EN_20xxxx_01) and start the installation from it
in otherwords what i do is copy and paste the data disk 1 in my documents folder. right click
and explore the folder, run the install from the SAUCE folder and then open the sa.ini folder
it will look something like this
[Volume]
Identity=AG_EN_201109_01
Produced=2011/07/15-22:48:58
[Trigger Dates]
Warning = 2011/10/28
Termination = 2011/11/01
– ***Replace the Original sa.ini with the patch we will create, in the DVD1 !!BEFORE YOU LOAD THE DATA!!!!! IN THE PROGRAM.
– To do this
– In the sa.ini folder change the dates to what ever you desire to mach the lic experation you made
so it will look something like this
[Volume]
Identity=AG_EN_201109_01
Produced=2011/07/15-22:48:58
[Trigger Dates]
Warning = 2020/06/01
Termination = 2020/07/01
– Exit the document and select save changes. ( I like to reopen the sa.ini after to insure changes.)
-then open service advisor. it will promp you to load data. change the path to load to the location
you saved data disk 1. let it load ……….and SUCCESS!!!!! ]]> obd2lily https://www.omaniaa.co/entry.php?b=98506 https://www.omaniaa.co/entry.php?b=98497 Sun, 12 May 2019 03:36:17 GMT 2017 KIA Ceed key and remote control programming… [URL="https://www.obd2tool.com/goods-6954-Lonsdor+K518ISE+Key+Programmer.html"]Lonsdor K518[/URL] work well!
80 bit immo system-pin code reading is not possible, do not read!
Got key by dump. you can key in pin code reading!
Only MK programmer knows! Abrites, Tango, Lonsdor I couldn’t read.
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-1.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-1.jpg[/IMG][/URL]
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-2.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-2.jpg[/IMG][/URL]
Then in Lonsdor:
Immobilizer – KIA – Select from vehicle – General area – Cee’d (JD) – 2013 – 2016
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-3.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-3.jpg[/IMG][/URL]
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-4.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-4.jpg[/IMG][/URL]
Two key fobs ready for programming
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-5.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-5.jpg[/IMG][/URL]
Insert key and switch ignition on
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-6.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-6.jpg[/IMG][/URL]
Enter pin codes
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-7.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-7.jpg[/IMG][/URL]
Programming completed
Will program the next one
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-8.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-8.jpg[/IMG][/URL]
Replace another new key and switch ignition on
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-9.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-9.jpg[/IMG][/URL]
[URL="http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-10.jpg"][IMG]http://cheapobd2scanner.com/wp-content/uploads/sites/4/2019/05/londor-k518-kia-add-key-10.jpg[/IMG][/URL]
Programming completed!

Pls remove the key and wait for 5s
Programming completed!

Test the new key on the car
It starts

Done!
Lonsdor has a big success! ]]> obd2lily https://www.omaniaa.co/entry.php?b=98497 https://www.omaniaa.co/entry.php?b=98478 Sun, 14 Apr 2019 15:06:41 GMT VXDIAG-Porsche-PIWIS3 Q: Does VXDIAG Porsche Piwis III support French? A: Yes. You can configure language by yourself. Q: Can I use my personal... VXDIAG-Porsche-PIWIS3

Q: Does VXDIAG Porsche Piwis III support French?
A: Yes. You can configure language by yourself.
Q: Can I use my personal computer?
A: No, the computer and the device is bound together. Because The Piwis III is bound with the encrypted chip. If you unplug the hard disk and insert into the other computer, then the software will has no nonsense.
Q: Can i add Porsche piwis3 authorization to the vxdiag full device?
A: Yes, only to VXDIAG FULL multi device. But need to purchase laptop additionally to use with PIWIS3. But if you buy Auto Scanner Tools VXDIAG Porsche PIWIS3 hardware, you are able to add other car brand license.
Q: Can i add Mercedes and BMW and Land Rover license to VXDIAG Porsche PIWIS3 hardware?
A: Yes. it can.
Q: What’s the difference between VXDIAG PIWIS2 and PIWIS3?
A: PIWIS3 has all functions of PIWIS2. PIWIS3 supports newer Porsche model with DoIP protocol, Piwis 2 does not.
Q: Is it online access possible for VXDIAG Porsche?
A: Yes, but you need online access account. We don’t provide the account.
Q:Will porsche piwis 3 access 2018 GT3 RS and 2016 GT3 RS?
A: Yes. it will.
Q: Will Piwis III renew ECU. Can i pay you for online programming service?
A: PIWIS3 will renew ECU on Porsche. We don’t provide online programming service.
Q: Will PIWIS3 do new ECU programming or initialization? It is a Porsche 911 GT3 2015.
A: Yes. It will. ]]> obd2lily https://www.omaniaa.co/entry.php?b=98478 https://www.omaniaa.co/entry.php?b=98475 Sat, 06 Apr 2019 14:07:39 GMT What’s the difference between [URL="https://www.obd2tool.com/goods-10171-LONSDOR-K518S-Auto-Key-Programmer.html"]Lonsdor K518S[/URL] and [URL="https://www.obd2tool.com/goods-4814-SuperOBD+SKP-900+SKP900+Auto+Key+Programmer+V35.html"]SKP900 Key Programmer[/URL]? Check the table comparison below:
[URL="http://obd2trade.com/wp-content/uploads/sites/5/2019/03/Lonsdor-K518S-vs-SuperOBD-SKP900.png"][IMG]http://obd2trade.com/wp-content/uploads/sites/5/2019/03/Lonsdor-K518S-vs-SuperOBD-SKP900.png[/IMG][/URL] ]]> obd2lily https://www.omaniaa.co/entry.php?b=98475 https://www.omaniaa.co/entry.php?b=98471 Mon, 01 Apr 2019 09:05:01 GMT SBB pro2 V48.88 key programmer ISO free download to works with 2019.1 cars, feedback, car list for European, American, Australian and Japanese cars... SBB pro2 V48.88 key programmer ISO free download to works with 2019.1 cars, feedback, car list for European, American, Australian and Japanese cars etc.

SBB PRO2 Key Programmer ISO free download:

[url]https://mega.nz/#!dExlgYKQ!Ykhr8Y8gHNiVLrWFbkCc2UJZ6xRFClOlB-LW_RNGnTw[/url]

Software Version: V48.88
Works with Toyota, Honda and Ford till Year 2019.1
No tokens limitation
Language: English, Italian, Deutsch, French, Spanish, Portuguese, Turkish

SBB-pro2-key-programmer-1

SBB Pro2 V48.88 feedback:
Generally speaking, it works great as it claims.
I have made few Tiida with sbb and all are ok
Correct Odometer for Ford Expedition 2011
Programs New Keys to Nissan NV200– Success
add new keys to Alfa Romeo 156, GT, 147 with SBB key programmer OK

SBB-pro2-key-programmer-2
SBB-pro2-key-programmer-3

Toyota G Chip : Yes
Q: PLEASE HELP ME FOR GRAND CHEROKKE 2008 YEAR .
READ EZS EEPROM 93C86.
I HAVE PIN CODE.

A: sbb can program good the non proximity key for these car try with sbb read pin code it should read by obd.
SBB Pro2 V48.88 car list (claimed):
Note that hot European, American, Australian and Japanese cars are included!

Esp. perfect for EU cars to
– Program new keys
– Read memory keys / pin code
– Reactivate keys no longer in possession of the vehicle owner
– Operate via menu-driven programming

SBB Pro2 Vehicle List
Acra
HONDA
MITSUBISHI USA
Alfa Romeo
HONDA USA
NISSAN
AUDI
HYUNDAI
NISSAN JAPAN
CADILLAC (GM)
HYUNDAI USA
NISSAN (TRUCKS)
CHEVROLET – for DAEWOO
JAGUAR
NISSAN USA
CHRYSLER
JEEP
OPEL VAUXHALL
CITROEN
KIA
PEUGEOT
DODGE
KIA USA
RENAULT
EAGLE
LANCIA
SEAT
FIAT
LEXUS
SKODA
FIAT – PSA
LINCOLN
SUBARU
FORD AUSTRALIA
MAZDA
SUZUKI
FORD EU
MERCURY
TOYOTA – PSA
FORD USA
MITSUBISHI
TOYOTA USA
GENERAL MOTORS BRASIL
MITSUBISHI AUSTRALIA
VOLKSWAGEN
HOLDEN
MITSUBISHI GREEK
VOLKSWAGEN (BRASILE)
Tested by the engineer working for [url]www.obd2tool.com:[/url]

SBB-pro2-key-programmer-4

SBB-pro2-key-programmer-5
SBB-pro2-key-programmer-6
SBB-pro2-key-programmer-7 SBB-pro2-key-programmer-8 SBB-pro2-key-programmer-9 SBB-pro2-key-programmer-10 SBB-pro2-key-programmer-11

SBB-pro2-key-programmer-12 SBB-pro2-key-programmer-13 SBB-pro2-key-programmer-14 SBB-pro2-key-programmer-15 SBB-pro2-key-programmer-16 ]]> obd2lily https://www.omaniaa.co/entry.php?b=98471 https://www.omaniaa.co/entry.php?b=98465 Fri, 15 Mar 2019 07:08:49 GMT Today I received [URL="https://www.obd2tool.com/goods-6985-Original+JLR+DoiP+VCI+SDD+Pathfinder+Interface+plus+Panasonic+CF53+Laptop.html"]JLR Pathfinder VCI DoIP[/URL], I have problem with drivers, I plugged it to USB and VCI Manager not recognize VCI, in Device Manager device name is Realtek USB FE Controller and I think it should be like Bosch VCI, but when I try to install another drivers it shows code 10 error. Can you help me with that? Is there another solution for this VCI?
This problem happened on Feb 5, 2019.
Updated (Feb 16, 2019):
Ok, I solved my problem, its working but its working on jlr manager from autosos.cn.
I thought this JLR Pathfinder vci would work on original jlr manager (delivered by Bosch ) and on original software like for example ford vcmII.
New problem on Feb 16, 2019):
I took screenshot of my problem, the pathfinder can’t recognize VCI, I done everything from instruction delivered with this vci and it not work.
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/03/JLR-Pathfinder-VCI-DoIP-error-pathfinder-cannot-recognize-VCI.jpg"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/03/JLR-Pathfinder-VCI-DoIP-error-pathfinder-cannot-recognize-VCI.jpg[/IMG][/URL]
driver was installed correctly. I can’t choose from pathfinder menu my vci.
The driver is called Realtek USB FE Family Controller and jlr manager downloaded from autosos.com.cn recognize vci by USB, wifi and ethernet cable.
Finally!!!
Problem is solved, I plugged in vci and installed again jlr manager. I guess that PDU driver wasn’t installed. I checked it on car and everything is working great. Thank you again very much for help and for your time. ]]> obd2lily https://www.omaniaa.co/entry.php?b=98465 https://www.omaniaa.co/entry.php?b=98462 Wed, 06 Mar 2019 03:29:39 GMT Cummins INLINE 7 DataLink Adapter is tested working fine with one-time activation and to combine with the computer. It is compatible with INSITE 8.2... Cummins INLINE 7 DataLink Adapter is tested working fine with one-time activation and to combine with the computer. It is compatible with INSITE 8.2 lite version and INSITE 8.2 pro version. INLINE 7 shares the same driver as INLINE 6.

How to use Cummins INLINE 7 Insite 8.3?

Here are several tips to follow

1.INLINE 7 can run the driver of INLINE 6.
2.Insite 8.3 Crack activation:

The user has to use the supplier’s Insite 8.3 Crack software to submit and wait the server to authorize till succeed, so it may take some time, after success, the software is combined with your computer.

3.Do not directly open the Inline 8.3 after installed, you need to go through the supplier’s software and use Inline 8.3.

4.After Inline 8.3 is authorized successfully, the user can use 3 years for free for 70 times, generally the user is supposed to get authorization every month (that is within 3 years, after the times is used up, the user can get authorization by themselves). After 3 years, the user will be charged.

5.After activation, the user is disallowed to change motherboard, memory and CPU. If you change them, you have to submit the Inline 7 serial number to the seller for activation

6.The Calibrations in the Inline 7 U disk can be used for 6 months, after 6 months later you can search “Inline Calibrations” on Google and download to use.

7.If you install Chinese insite 8.3, then you have to use the Chinese “Cummins License Configuration tool”; if you choose the other language to install insite 8.3, then use the English “Cummins License Configuration tool”, because the dealer code is not the same.

Chinese dealer code: 010C

English dealer code: 086N

cummins-inline-7-insite-8-3

8.After input Dealer code and serial number, please click on ” Payment success”, then provide the dealer with the serial number for processing in the server, again you click on ” Payment success” and you will receive a message indicating success. ]]> obd2lily https://www.omaniaa.co/entry.php?b=98462 https://www.omaniaa.co/entry.php?b=98461 Mon, 25 Feb 2019 12:57:18 GMT Here list reasons why you should buy a Benz star mercedes diagnostic tool with a laptop full package: —With the Dell D630’s dedicated serial port,... Here list reasons why you should buy a Benz star mercedes diagnostic tool with a laptop full package:

—With the Dell D630’s dedicated serial port, there was no issue for me…. it was plug and play… I just loaded the HDD from the Seller into my Dell and all I needed to do was activate WIS/EPC and XENTRY/DAS with “activation keys”… I only use the Dell for mb star sd c4 purposes…

mb-star-c3-1

—Bought an older Dell D630 laptop with a serial port and plan on buying MB SD Connect C4 directly installed in a Dell D630 hard drive. No Virtual Machine issues.

—Benz Mb Star C3 / C4 actually specifies the computer or tablet used in the SDS environment… The T30 is rather slow but will get the job done.

—If your ever in the market for a faster SDS laptop, the Dell D630 with at least 2Ghz and the speed improvement especially when using Xentry is like night and day.

—the HDD that is pre-loaded with the software for SDConnect 4 by the Seller, is inserted into the DELL D630… The DELL D630 is the fastest laptop with the RS232 feature.

—Need to connect directly into a RS232 port without using an interface – this is why I went for the complete system with laptop.

—The software Xentry/ DAS is a bit slow on an old IBM so that it is worth paying a bit extra and getting a Dell D630.

—There is a very specific set of COM ports you must use for it to work. For example you need DAS to be looking at COMx within the VM session, then VMware needs to redirect that to COMx which is a ‘physical’ serial port on your machine.

—It’s probably because it has a real com port. Most laptops these days have just a USB port and things don’t always work right if you’re using a USB to RS-232 converter. You wouldn’t want to brick a component during an update if you’re using USB. The other option would be to get a C4 system, but then they cost more. I think there are a couple other systems out there like IBM that also have real com ports.

—The PART D mux(C3) is a serial ported mux—that’s the reason for the Dell and IBM older laptops.

—The PART W mux(SDconnect C4) is and Ethernet/wifi connected system and that is the reason for use on other laptops—the issue is the operating system currently DAS Xentry only runs on XP.

—Plug and play!! It is more convenient for users because the software for C3/SD C4 diagnostic tool will be pre-installed before delivery. ]]> obd2lily https://www.omaniaa.co/entry.php?b=98461 https://www.omaniaa.co/entry.php?b=98418 Wed, 30 Jan 2019 03:47:45 GMT Ford Fusion 2017 smart key successfully programmed by [URL="https://www.obd2tool.com/goods-6954-Lonsdor+K518ISE+Key+Programmer.html"]Lonsdor K518ISE Key Programmer[/URL] under New Mondeo menu.
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-1.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-1.png[/IMG][/URL]
Original key (Put original key into cup holder)
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-2.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-2.png[/IMG][/URL]
New smart key 315MHz
Connect K518 with vehicle via OBD socket
Select Immobilizer->Ford->China->New Mondeo->2017->Smart Key->Add smart key
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-3.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-3.png[/IMG][/URL]
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-4.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-4.png[/IMG][/URL]
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-5.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-5.png[/IMG][/URL]
Turn ignition switch to ON position
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-6.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-6.png[/IMG][/URL]
Lonsdor K518 reads vehicle info. VIN, key number
Put a new smart key into slot (cup holder) and press Start button
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-7.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-7.png[/IMG][/URL]
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-8.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-8.png[/IMG][/URL]
Programming in progress
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-9.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-9.png[/IMG][/URL]
Identify new key programmed
[URL="http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-10.png"][IMG]http://cheapobd2tool.com/wp-content/uploads/sites/3/2019/01/lonsdor-k518-2017-ford-fusion-10.png[/IMG][/URL]
Program completed.
Test the new key. ]]> obd2lily https://www.omaniaa.co/entry.php?b=98418 https://www.omaniaa.co/entry.php?b=98402 Sat, 26 Jan 2019 12:22:10 GMT 1.Set router

username：ISAP

password：12345678

2.Connect the laptop with router

3.The device is powered on and waits for the WLAN light to be on for a long time.



If the customer needs to set the WIFI account password of BMW ICOM NEXT A+B+C.Power on the device and connect to the computer via a network cable

1.Open IToolRadarsoftware

图片2

2.Record the current IP address of the device

图片3

3.Open IE browser and enter the IP address you just recorded.

+ :58000图片4

4.Enter WLAN Settings.Put username in SSID,put the password in Pre-shared Key

图片5

5.Click Save Changes

6.Then restart the device and you can use it ]]> obd2lily https://www.omaniaa.co/entry.php?b=98402