مشاهدة تغذيات RSS


Which are the advantages of computerized soldering devices in comparison to manual soldering?

تقييم هذا المقال
اضغط على الصورة لعرض أكبر. 

الإسم:	18.jpg 
مشاهدات:	21 
الحجم:	10.9 كيلوبايت 
الهوية:	22519
A system is only pretty much as good as its repeatability. Hand soldering isn't a repeatable course of action. Oxides about the soldering iron suggestion or around the solder, force used, heated get in touch with area, flux software and operator skill can all use a important effects about the finished solder joint.The auto soldering machine in SunzonTech UXT series are highly adaptable to clients\' production lines. Choose the best model to optimise your production.
A single can have an incredibly beautiful solder joint about the outside the house but a bad joint over the within. The interface in between the majority solder as well as solder land or perhaps the soldered part lead might have a dramatic effect on the trustworthiness on the completed solder joint.
Soldering leads to an intermetallic compound (IMC) layer concerning the solder and also the soldered object. The IMC layer in a SAC solder joint consists of tin, silver and copper plus several of the solder wetted product. So if the make contact with surface area is copper, excess copper might be section in the IMC coupled with tin and silver.
When the solderable interface is nickel, nickel will likely be aspect on the IMC coupled with tin, copper and silver. IMCs are notably brittle and the thicker the IMC, the greater brittle the solder joint. IMC thickness will depend on two components: temperature and time as well as the larger the temperature or perhaps the more time time of heating, the thicker the IMC.
The ultimate intention of any soldering procedure is to decrease the IMC additionally to making clean fillets from the good configuration as per workmanship common IPC-610. Hand soldering operations vary from station-to-station(products dependent) and operator-to-operator, as a result hand soldering is definitely the minimum favorable of all assembly techniques as it is not a reproducible method. Hand placement of factors into wet paste is discouraged as that operation normally leads to solder bridging/shorts and even displacement of adjacent components.
If only loose sections are available, these elements is usually re-taped onto a employed reel. Being an choice, a matrix tray might be reused or created by uncomplicated machining along with the loose sections nested in it for automated pick-up and placement. The last word goal is always to minimize the amount of soldering methods, only use reproducible processes (get rid of hand soldering) and decrease touches to the board to lower board flexure and solder joint damage. Keep away from hand soldering!
related articles:
Exactly what is an computerized soldering machine?
الكلمات الدلالية (Tags): auto soldering machine إضافة/ تعديل الكلمات الدلالية
غير مصنف


جميع الحقوق محفوظة للسبلة العمانية 2020
  • أستضافة وتصميم الشروق للأستضافة ش.م.م