https://up.omaniaa.co/do.php?img=411
https://up.omaniaa.co/do.php?img=410
https://up.omaniaa.co/do.php?img=1360
مشاهدة تغذيات RSS

obd2lily

How to Reset 2012 Reset Nissan Murano CVT Fluid Count with Nissan Consult 3

تقييم هذا المقال
Vehicle model: Nissan Murano Z51 3.5L CVT 2012Y

Purpose: reset CVT fluid “life” monitor



Device used:

You need a professional scan tool to reset the CVT transmission fluid count. The normal code readers will not work.

Nissan Consult III, Nissan Consult III Plus, Launch x431 V and an Autel ms908p scanner, all of these will do the reset.



Procedure for using Nissan Consult III diagnostic tool:

If you are using a clone, Consult 3 plus is better choice.

This procedure is preferably carried out after changing the oil in the CVT .



Launch Starter in which we select Consult-III :

图片1

Press the Connect button :

图片2

Choose vehicle model Murano Z51 after 2010.v. and press the Select button :

图片3

Confirm the selection with the Confirm button :

图片4

Choose Diagnosis :

图片5

Select the type of Can- bus according to the configuration, in this case, the very first, and click the Next button :

图片6

Click on the tablet (top left):

图片7

Choose System Diagnosis :

图片8

Click on Transmission and OK :

图片9

Moving towards Work Support :

图片10

Click on Conform CVTF Deteriortn and Next :

图片11

At the moment, the fluid counter shows 7897

图片12

Click the Clear button and once again agree:

图片13

Counter reset:

图片14

Reset fluid count success with Nissan Consult 3 scanner.

图片15

Done.

التعليقات