How to Reset 2012 Reset Nissan Murano CVT Fluid Count with Nissan Consult 3
بواسطة
, 18-08-2019 عند 05:02 PM (802 المشاهدات)
Vehicle model: Nissan Murano Z51 3.5L CVT 2012Y
Purpose: reset CVT fluid “life” monitor
Device used:
You need a professional scan tool to reset the CVT transmission fluid count. The normal code readers will not work.
Nissan Consult III, Nissan Consult III Plus, Launch x431 V and an Autel ms908p scanner, all of these will do the reset.
Procedure for using Nissan Consult III diagnostic tool:
If you are using a clone, Consult 3 plus is better choice.
This procedure is preferably carried out after changing the oil in the CVT .
Launch Starter in which we select Consult-III :
图片1
Press the Connect button :
图片2
Choose vehicle model Murano Z51 after 2010.v. and press the Select button :
图片3
Confirm the selection with the Confirm button :
图片4
Choose Diagnosis :
图片5
Select the type of Can- bus according to the configuration, in this case, the very first, and click the Next button :
图片6
Click on the tablet (top left):
图片7
Choose System Diagnosis :
图片8
Click on Transmission and OK :
图片9
Moving towards Work Support :
图片10
Click on Conform CVTF Deteriortn and Next :
图片11
At the moment, the fluid counter shows 7897
图片12
Click the Clear button and once again agree:
图片13
Counter reset:
图片14
Reset fluid count success with Nissan Consult 3 scanner.
图片15
Done.