zaiamanda

The operating principle of the CNC press is characterized by the use of a motor to add the rolling of the oil pump equipment, and deliver the hydraulic oil to the integrated cartridge valve block, and then pass the hydraulic The oil is distributed to the upper cavity and the lower cavity of the oil cylinder, and high pressure occurs in the hydraulic oil, so that the oil cylinder can move up and down or left and right. CNC press equipment is a mechanical equipment that uses hydraulic oil as a substance to transmit energy. The hydraulic oil spreads the energy stone in a closed container and obeys Pascal's law. custom cnc machining，The outstanding principle of the CNC press is in the control of the circuit and the oil circuit.


On the circuit:
1. Select weighing sensors, which can accurately measure the pressure of the CNC press in the process of press-fitting, with an error of about 1%;


2. The encoder is selected to display the displacement of the oil cylinder, with an accuracy of 0.01mm.


3. It can store 20 sets of data programs, select 5-point press for comparison, and an alarm will occur if there is an abnormality during the press.




The scope of application of CNC press:
The digital press can be used to integrate the inserts of the rocker arm device of the engine and the interference cooperation of the rocker arm, the combination of the piston and the piston pin of the gasoline engine, the excessive cooperation of the bearing and the bushing, the motor rotor and the rotating shaft It is used in various interference assembly applications such as gas car industry and electric motor industry.


likeï¼ڑ

The principal features of CNC equipment instruments
The key features of CNC unit equipmen
What are the characteristics of CNC punch